[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [RiminiLUG-General] Kernel Panic aleatorio su Debian e Ubuntu a 32 e 64 bit
scusate ho fatto confusione tra > e >> :D
--
Davide Bellettini
davide@xxxxxxxxxxxxxxxxxxx
www.davidebellettini.it
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
Please note the following marginal Attributes:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
190 Airflow_Temperature_Cel 0x0022 063 037 045 Old_age Always In_the_past 37
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 171 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 171 occurred at disk power-on lifetime: 8649 hours (360 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 3a 3d 41 e6 Error: UNC at LBA = 0x06413d3a = 104938810
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 34 3d 41 06 00 01:01:44.159 READ DMA
ec 00 00 00 00 00 00 00 01:01:44.151 IDENTIFY DEVICE
ef 03 46 00 00 00 00 00 01:01:44.151 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 00 01:01:44.143 IDENTIFY DEVICE
c8 00 08 34 3d 41 06 00 01:01:42.193 READ DMA
Error 170 occurred at disk power-on lifetime: 8649 hours (360 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 3a 3d 41 e6 Error: UNC at LBA = 0x06413d3a = 104938810
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 34 3d 41 06 00 01:01:42.193 READ DMA
ec 00 00 00 00 00 00 00 01:01:42.185 IDENTIFY DEVICE
ef 03 46 00 00 00 00 00 01:01:42.185 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 00 01:01:42.179 IDENTIFY DEVICE
c8 00 08 34 3d 41 06 00 01:01:40.171 READ DMA
Error 169 occurred at disk power-on lifetime: 8649 hours (360 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 3a 3d 41 e6 Error: UNC at LBA = 0x06413d3a = 104938810
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 34 3d 41 06 00 01:01:40.171 READ DMA
ec 00 00 00 00 00 00 00 01:01:40.163 IDENTIFY DEVICE
ef 03 46 00 00 00 00 00 01:01:40.155 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 00 01:01:40.150 IDENTIFY DEVICE
c8 00 08 34 3d 41 06 00 01:01:38.233 READ DMA
Error 168 occurred at disk power-on lifetime: 8649 hours (360 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 3a 3d 41 e6 Error: UNC at LBA = 0x06413d3a = 104938810
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 34 3d 41 06 00 01:01:38.233 READ DMA
ec 00 00 00 00 00 00 00 01:01:38.225 IDENTIFY DEVICE
ef 03 46 00 00 00 00 00 01:01:38.225 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 00 01:01:38.219 IDENTIFY DEVICE
c8 00 08 34 3d 41 06 00 01:01:36.296 READ DMA
Error 167 occurred at disk power-on lifetime: 8649 hours (360 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 3a 3d 41 e6 Error: UNC at LBA = 0x06413d3a = 104938810
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 34 3d 41 06 00 01:01:36.296 READ DMA
ec 00 00 00 00 00 00 00 01:01:36.287 IDENTIFY DEVICE
ef 03 46 00 00 00 00 00 01:01:36.287 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 00 01:01:36.281 IDENTIFY DEVICE
c8 00 08 34 3d 41 06 00 01:01:34.361 READ DMA